The trailer is delivered with the following specifications:

• 88 m³ 3-axle Cargo Floor

• 385/65 R22.5 M+S tires and 3PMSF approved winter tires

• 9 T SAF disc brakes

• Wabco EBS-E Premium brake system

• Underride bumper in aluminum D-profile with closed back. incl. plate to cover taillights and a large Kraker mud flap

• Cargo Floor 500 SL-Compact floor planks in smooth aluminum (21 pcs. in 8 mm)

• Walkway for handling manual roll tarpaulins with a ladder access on the left side with 2 locking cables

• Ladder on door on front wall on left side

• Left side with 2 doors in front, 2 x 2 doors in the middle and 2 doors in the back, mounted on strong aluminum door posts, which are used to connect the door hinges

• 300 mm pop-up roof mounted on the left side built into the front and rear corner posts

• Seamless aluminum door post with 2 (270°) doors, made of aluminum panels

• Sliding partition wall made of welded aluminum profiles, equipped with a floor mat

• Rolled tarpaulin with white strip in the middle (so that light can enter the box for safety), attached to the left side with TIR rings

• 7 pcs. galvanized steel crossbars Ø50 x 5.1 mm, which are removable

• Stainless steel toolbox, mounted at the rear on the left side

• Pneumatically foldable rear bumper

• Radio remote control with up to 6 functions. Floor, lift axle and LED work lights on reverse gear (6 max.) and pneumatically foldable rear bumper

• 12 pairs of load securing rings recessed in floor edge profiles, TÜV certified

The trailer is delivered with the following specifications:

• 94 m³ wedge-shaped 4-axle Cargo Floor (3 fixed + 1 steering axle)

• Lift axle on 1st and 3rd axle

• Hot-dip galvanized chassis

• BPW axles with drum brakes (braking force 61%)

• Low curb weight – only 9,184 kg including equipment, load capacity 38,820 kg

• Wabco EBS-E Premium braking system with smart board

• 6 work lights on; behind the 3rd axle, behind the support leg and on the front wall inside the box.

• Tiltable underrun bumper in anodized aluminum. D-profile with closed back, controlled via remote control

• Cargo Floor 500 SL-Compact floor planks in smooth aluminum (21 pcs. in 8 mm)

• Door on front wall on left side

• Aluminum wear plates on both sides inside the rear

• Single rod closure in stainless steel per door

• Sliding partition in welded aluminum, equipped with floor mat and side lining in soft green plastic

• Stainless steel toolbox with integrated valves and smart board

• Anodized cover in cyclist protection and spacers between the axles

• 2 x 3 pcs. ferry hooks with fixing plate

• Pneumatic folding rear bumper with switch on the left side

• Roll & Rite automatic roof system with Kraker radio remote control

• Tarpaulin on a roll in the back for interior use with air wrench for tightening

• Remote control for automatic tarpaulin, floor and bumper

• Extra work lights and red lights above rear doors

• 25 mm hose reel with blow gun mounted on the front wall so it can be used through the front door

• Hydraulic hoses wrapped in plastic and suspended with Jo/Jo so you can have all wires and hoses mounted at all times during driving and unloading.

• Additional painting of steel rims for longer durability